Trumpf Laser + Systems 1
Trumpf Laser + Systems
Used Lasermachines, AMADA, LVD, Finn-power, Laser Lab, Behrens, BLM-ADIGE 2
Used Lasermachines, AMADA, LVD, Finn-power, Laser Lab, Behrens, BLM-ADIGE
Used Lasermachines,    PRIMA INDUSTRIE, LASERWORK, HELD, SALVAGNINI, BALLIU 7
Used Lasermachines, PRIMA INDUSTRIE, LASERWORK, HELD, SALVAGNINI, BALLIU
7
USED LASER SYSTEMS, WELDING/CUTTING with Yag, Diode, Co2 and Fiber Laser
2
3D LASER Systems cutting, welding, TUBE-PROCESSING
MICRO/MACRO/MARKING CO2+YAG+ SYSTEMS 0
MICRO/MACRO/MARKING CO2+YAG+ SYSTEMS
0
Laserkombi, Punching-, press brake machine
Cutting Head, beam expander, cooler, exhaust, laser cell 2
Cutting Head, beam expander, cooler, exhaust, laser cell
0
Metal sheet store
1
Fiber Lasers, High Power IPG
2
Used Laser Marker, ND YAG, C02, Fiber laser
0
Medizinlaser
6
Co2 LASER
4
SOLID STATE LASER, ND-YAG, Diode, Fiber
6
Prtecitec, cutting-welding head, optics

ID Masina Laser: c1

Print!

Metal sheet store


Tip: MPL 2515, 500-1500W

An fabricatie: new
Putere laser [W]: 250
Spatiu de lucru X Y Z [mm]: 2500 x 1500
Inalta presiune: nu
Comanda numerica: NUMERICAL CONTROL “SMART AXIS
Schimbator palete: no

Descriere masina laser:

CO2 LASER CUTTING SYSTEM MPL 2515 500W (or 250W/1000W/1500W), composed of:

- LASER SOURCE slow axial flow carbon dioxide of type semi-sealed. Nominal power 500 watts. Laser source can operate in continuous or pulsed mode. \"Switching mode\" power supply.

- CUTTING TABLE with separate X-Y orthogonal axis, sliding guides and high precision ball bushing screws. Screws for control of movements over axes with automatic clearance regeneration. Table with anodised and antireflection aluminium rods.
Working area mm 2500 x 1500.
The structure is made of a fixed bridge and a moving bed.

- FOCUSING HEAD: motor driven head with focal length lens. Adjustable focus within 100mm from working table; low pressure functioning of the shielding gas.

- NUMERICAL CONTROL “SMART AXIS”: linear and circular interpolation; mass memory, 3,5\" floppy disk, 1.44 Mbytes, WINDOWS based and selection of focusing head positioning; laser power control adjusted to cutting speed.

- POST PROCESSOR for translation of drawings to CNC programs.

- CLOSED CIRCUIT COOLING SYSTEM

Pentru pret, imagini si mai multe detalii despre aceasta masina laser (MPL 2515, 500-1500W), contactati-ne la: h.d.ruebcke@web.de

< Metal sheet store